The stainless steel laser cutting machine is higher in cost than wire cutting. The accuracy is not as good as wire cutting, but the speed is twice that of wire cutting. It can achieve large-scale production. After cutting, it can process non-metallic materials and realize intelligent processing. Instead of multiple machines, one machine has become the core of processing equipment. It can be seen that stainless steel laser cutting is a fast and effective processing method, but the control of cutting quality is particularly important.
When laser cutting mirror stainless steel, in order to prevent the board from serious burns, a laser film is required! Although protected by a film, there is still a slight burn on the edges. At this time, it is necessary to strictly control the laser cutting process parameters during processing to maintain the good corrosion resistance of such materials. The most important process parameters that affect the cutting quality of stainless steel are cutting speed, laser power, oxygen pressure and focus.
In addition, the surface smoothness of stainless steel products in many industries is relatively high. So, what should I do if there are burrs in the stainless steel laser cutting laser cutting machine? The burr of stainless steel laser cutting is generally the problem of the cutting tip of the cutting head. This factor should be examined first. If the replacement of the cutting tip cannot be solved, it is necessary to check whether the movement of the laser cutting machine guide rail is stable.